Description
Granit Gipskleber SW 800 is used for bonding dry plaster with gypsum cardboard plates and thermal tiles on vertical wall surfaces with brick and concrete. It is not suitable for stucco.Processing
Granit Gipskleber SW 800 is added in clean water (17 liters per 30 kg Gipskleber SW 800). Mixed with the mixer or by hand, until homogeneous mass is obtained without grain. Prepared mass is applied only on the clean and dry surface.
Plastering waste, dying old and wall carpets should be removed before application Graniti gipskleber SW 800. Smooth concrete surfaces and non-absorbing substrate should be painted with Granit BetonKontakt, while surfaces with high water absorption properties must be treated with Graniti Tief grund. This product should not be mixed with other materials. Processing time is approximately 1/2 hours.
Setting and leveling of the plate should be completed within 10 minutes after placing the Graniti Gipskleber
SW 800.
Storage
Approx 6 months in dry places on wooden pallets.
TIPS
working tools should be cleaned immediately with water after application
remaining gypsum waste can reduce significantly open time of prepared product.